Hobbywing Xrotor Micro Combo (Flight Controller F4-G3 + 60a BL32 4in1 ESC)

Hobbywing Xrotor Micro Combo (Flight Controller F4-G3 + 60a BL32 4in1 ESC)

This is the bundled version of the Hobbywing Xrotor Micro F4-G3 Flight Controller and Xrotor Micro 4in1 60a BL32 ESC.

Features:

• Super-high Running Frequency. The STM32F405 MCU which features the powerful computing capability and super-high running frequency allows the FC to run the PID and gyro with higher frequency.
  
• ProShot1000, DShot 150/300/600/1200, Oneshot125, Oneshot42, Multishot Modes Supported. Besides the latest ProShot and Dshot 150/300/600/1200 mode, the FC also supports the regular PWM mode, Oneshot125 mode, Oneshot42 mode and Multishot mode.
  
• TF-card Insertion Supported. Onboard OSD microchip allows users to easily adjust various (OSD) parameters via the Betaflight/Cleanflight software.
  
• Onboard OSD Microchip. Onboard OSD microchip allows users to easily adjust various (OSD) parameters via the Betaflight/Cleanflight software.
  
• BetaFlight/Cleanflight Firmware Ready. The FC which supports Betaflight/Cleanflight firmware & allows parameter adjustment via Betaflight /Cleanflight software is more applicable to FPV flying & racing.

IMPORTANT:

1. Power capacitor must be used. Every Xrotor 60amp 4-1 includes a power capacitor. Failure to use the included power capacitor will result in damage to your ESC.

2. BL_Heli_32 ESC settings can cause damage. Default settings should be used.

3. Motor KV ratings and prop size/pitch combinations recommendations.

- 4s Lipo using 5 inch props up to 2700KV
- 5s using 5 inch props, up to 2450 KV
- 6s using 5 inch props up to 1750 KV

Specifications (Xrotor Micro 60a BL32 4in1):

• Firmware: Hobbywing_XRotor_BLHeli_32 Version
• DShot150/300/600/1200
  
• Lipo Power Input: 3-6S
• Continuous Current: 60a x 4
• Burst Current: 80a x 4
  
• BEC Output: 5V@0.6A
  
• Input wires: 12AWG 130mm
  
• Net weight: 15g
• Mounting Hole Dimensions: 30.5x30.5mm

Specifications (Xrotor Micro F4-G3 Flight Controller):

• Firmware: OMNIBUSF4SD
• MCU: STM32F405
• BEC Output: 5v/12v
• Gyro: ICM20602
• Voltage Monitoring: Supported
• Current Monitoring: Supported
• External Buzzer: Supported
• Led Control: Supported
  
• Net weight: 16g (excludes wire)
• Size: 36x36mm
  
• Hole Distance: 30.5x30.5mm

Includes:

• 1x Hobbywing Xrotor Micro 4in1 60a BL32 ESC
• 1x Hobbywing Xrotor Micro F4-G3 Flight Controller
  
• 1x XT60 Pigtail
• 1x Hardware package with standoffs
  
• 1x Connector set
• 1x Capacitor
  
• 1 x Manual
  

Coupons not accepted for this product.